Tweeter Dome Material: Neo-Mylar Soft Dome Tweeter- Impact Resistant Tweeter ElementsSurround: UV Resistant Rubber Surround: Moisture Resistant Rubber Surround With High Mid-Bass ImpactCone: Silver Alpha-Cellulose Polypropylene Cones - Treated Pressed Paper Cone Produces Musical Midrange AndBass Tones While Remaining Light WeightSurround / Cone Coupling: The Cone/Surround Connection Utilizes A High Temp Adhesive Which Assure TheCone And Surround Do Not Separate In High Power Uses Or Extremes Of WeatherGasket: Textured ABS Assures A Ridged Linear Seal To The Mounting SurfaceTinsel Leads: (Braided) Highly Conductive While Remain Flexible During High Power ApplicationsVoice Coil: Pure Copper Creates Strong Magnetic Field With A Very Thin ExtrusionVoice Coil Former: Kapton - Lightweight And Efficiently Dissipates HeatSpider: Epoxy Infused Natural Fiber - The Natural Fiber Allows Flexibility While The Epoxy Which Gives Strength During The Manufacturing ProcessCooling System: Over-Coil Air Is Exchanged Over The Voice Coil Through The SpiderCrossover Type: Passive Butterworth Smooth Transition Of Frequencies From Midrange/Mid-Bass To The Tweeter ElementCrossover Special: 6 dB Internal Integrated Into The Design To Assure Smooth Midrange To Tweeter Frequency TransitionsFrame: Anti-Resonant Stamped Steel Frame Very Strong With Minimal Harmonics Or Distortions From Flex Or RingingMotor: Ferrite Magnet Creates A Strong Magnetic Field While Remaining Small Enough To Fit Nearly Every ApplicationConnectors: Spade Use Spade Connectors Or Solder Direct For The Best ConnectionGrills: Yes - Protects the speaker from accidental damage. Not used if speaker is mounted behind vehicle panelTweeter Material: Neo-Mylar Soft Dome Great Sound Quality And Increased ReliabilityTweeter Size: 1 Inch Clear Highs While Handling Plenty Of Power Without Sounding HarshTweeter Surround Material: Kapton - Lightweight And Efficiently Dissipates HeatPair AUTOTEK ATS525CX 5.25" 500 Watt 2-Way Car Stereo Coaxial SpeakersRMS Power Handling: 125 WattsPeak Power Handling: 250 WattsSpeaker Impedance: 4 OhmsFrequency Response (+/- 3db): 60 Hz - 20 kHzSensitivity (1 Watt/1 Meter): 88 dBCrossover Point: 4 kHzCrossover Slope: 12 dBMounting Diameter/Cut Out: 4.48Outside Diameter: 6.26Mounting Depth/Chassis Depth: 2Product Dimensions: 12.19" x 6.88" x 3.88" inchesProduct Weight: 3.1 Lbs.
Product Attributes:
Weight (lbs.): 3.00 lb
Length (in.): 12
Width (in.): 7
Height (in.): 4