The Tempest AA48110-2 is a high-performance, affordable oil filter for your aircraft. Engine upkeep includes preventative maintenance and the proper equipment. Use the Tempest oil filters to extract harmful steel from your engine. Extend engine life and increase performance with the 48110 oil filters magnetic filtration system, designed to attract even the finest steel debris. Installation nuts will not fall off with the Tempest oil filter. Its improved nut welds are reinforced and stronger than ever! The AA48110 boasts burst strength of 600 psi, which exceeds the APR 1400 standard by 50 percent. These filters are built to withstand the toughest conditions and maintain superior performance. The Tempest oil filters feature lubricated synthetic rubber base gaskets to ensure exact, proper torque during their installation. The Tempest AA48110 is easy to remove, designed for any handyman or advanced technician. Our affordable prices and fine products will keep your engine running smoothly. Increase performance and reduce wear by investing in the best oil filters for your aircraft.

Magnetic Filtration System The Tempest Original filter has more media area (311square inches) than any other aviation oil filter. An internal magnet, designed to attract fine steel particles to small to be caught by the filter media that can be harmful to the engine, effectively increases the filtration performance of the filter.

Improved Nut Welds Nut welds are so strong that the can will distort without breaking the welds! During production testing nuts are actually ripped away from the can the base metal must fail, the welds must not (see photo). Using Tempest Original filters means no more frustration with installation nuts falling off.

Meets TCM bypass Specification of 12-14psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

Burst strength of 600 psi Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Original oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Non-Stick Gaskets Tempest Original oil filters incorporate especially lubricated synthetic rubber base gaskets made from a proprietary compound. This helps insure proper torque during installation and easy removal.

Filter Model: AA48110-2

Dimension: 4 3/8 H x 3 3/4 Dia.

Thread Size and Type: 3/4-16 Male Thread

Installation Torque: 16-18 FT LBS

Full Can Thickness: .019"

Base Plate Thickness: .187"

Burst Pressure: 700 psi

Media Size: 311 sq. in.

Leaf Spring Technology for Lateral Stability of Filter Pack

Powder Coated Finish

Installation Instructions

Lubricate gasket with DUPONT Molykote 4 die-electric compound or equivalent. If unavailable, use clean engine oil.

Torque filter to 16-18 ft-lb.

Run engine and check for oil leaks.

Check oil level.

Safety wire.